HT210
EN - 8
5.2. AC VOLTAGE MEASUREMENT
CAUTION
The maximum input for AC voltage is 600V. Do not attempt to measure
higher voltages to avoid electrical shocks or damages to the instrument.
Fig. 3: Using the instrument for AC Voltage measurement
1. Switch on
Hz%
. “AC” symbol is displayed
2. Insert the test leads into the jacks, the red plug into
V
Hz%
jack and black
plug into
COM
jack
3. Connect the test leads to the circuit under test (see Fig. 3). The voltage value is
displayed
4. If the message "
O
.
L
" is displayed the higher range is reached
5. Pressing the
Hz%
key until the symbols “Hz” or “%” are shown at display to meaning
the readings of frequency or duty cycle associated to voltage AC value
6. For HOLD function and Relative measurement please refer to § 4.2
