HT Italia VEGA 76, Руководство пользователя

Страница: 14 / 60

VEGA 76
EN - 12
5.3. BASIC SETTING: RECORDER CONFIG
This option permits to check and eventually modify the recording parameters and the
selected parameters (up to a maximum of 64). The calculation of the selected values is not
affected by the selector’s position. If the number of selected values exceeds 64 the
message "
too many param " will be displayed. The MENU mode is divided into 4 separate
sub-pages:
1
st
page: This page permits to set the START/ STOP mode (AUTO or MANUAL),
the START and STOP time if AUTO mode is selected, the Integration
Period value, the Enabling/Disabling of Voltage Anomalies detection, the
Enabling/Disabling of Harmonics detection. Press
ENTER to confirm the
settings and pass to the following page.
Press
ESC to leave the Menu without modifying the existing parameters.
2
nd
page: This page is dedicated to the settings related to the VOLTAGE recording.
Press ENTER to confirm the settings and pass to the following page.
Press ESC to leave this page without modifying the existing parameters.
From this page you can enter the sub-page “Harmonics” which permits to
select the voltage harmonics to be recorded.
Press
ENTER to confirm the settings and leave the “Menu Harmonics".
Press ESC to leave the "Menu Harmonics" without modifying the existing
parameters.
3
rd
page: This page is dedicated to the settings related to the CURRENT
recording.
Press
ENTER to confirm the settings and pass to the following page.
Press ESC to leave this page without modifying the existing parameters.
From this page you can enter the sub-page “Harmonics” which permits to
select the current harmonics to be recorded.
Press
ENTER to confirm the settings and leave the “Menu Harmonics".
Press ESC to leave the "Menu Harmonics" without modifying the existing
parameters.
4
th
page: Menu composed of two sub-pages dedicated to the selection of the
POWERS and ENERGIES to be recorded. From this page you can enter
the sub-page “POWER” and “ENERGY” which permits to select the
parameters to be recorded.
By selecting the active powers for the recording, the corresponding active
energies will be automatically selected.
By selecting the reactive powers for the recording, the corresponding reactive
energies will be selected.
Press
ENTER to confirm the settings.
Press ESC to leave the "Menu" without modifying the existing parameters.
The various pages of the " RECORDER CONFIG " can be schemed as follows: