background image

9

HSU Speaker

System Limited

Warranty

If the speaker system proves to be defective 
in materials or workmanship within seven
years from the date of the original cus-
tomer’s purchase, or the amplifier within
two years, we will, at our option, repair or
replace the defective product. 

*DISCLAIMER

THE WARRANTY STATED HEREIN IS IN LIEU  
OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE AND ALL
OTHER LIABILITIES AND OBLIGATIONS OF HSU,
ALL OF WHICH ARE EXPRESSLY DISCLAIMED.
HSU HAS NOT MADE AND DOES NOT HEREBY
MAKE ANY OTHER REPRESENTATION, WARRANTY
OR COVENANT WITH RESPECT TO THE CONDI-
TION, QUALITY, DURABILITY, DESIGN, OPERA-
TION, CAPACITY, FITNESS FOR USE OR SUITABIL-
ITY OF THE SPEAKER SYSTEMS.

Exclusion of
Certain Damages

HSU’s liability for any defective product is limited
to repair or replacement of the product at our
option. HSU shall not be liable for incidental or
consequential damages of any kind or character
because of product defects. Some states do not
allow limitations on how long an implied warranty
lasts and/or do not allow the exclusion or limitation
of incidental or consequential damages, so the
above limitations and exclusions may not apply.

This Warranty Does
Not Cover:

Damage caused by abuse, accident, mis-use,
negligence, or improper operation.

Products that have been altered or modified.

Any product whose serial number has been
altered, defaced, or removed.

Normal wear and maintenance.

Damages caused by shipping. (All claims for
shipping damage must be made with the carrier.)

©2011 HSU Research

Warranty Service

Warranty service must be performed by
Hsu Research or an authorized service 
center.

All warranty repairs must be accompanied
by the original bill of sales. No other 
document is acceptable or is required.
This warranty gives you specific legal rights,
and you may also have other rights which
vary from state to state.

Due to our continual efforts to improve product
quality as new technology and techniques become
available, HSU reserves the right to revise its
Speaker Systems specifications without notice.

Specifications

Frequency Response (+/-2 dB) 
(1 Port Open, EQ1, Q = 0.7)

Frequency Response (+/-2 dB) 
(2 Ports Open, EQ2, Q = 0.7)

Woofer Size 

Amplifier Power

Crossover Frequency Range

Crossover Slope

Crossover Type

Q

Phase

Dimensions

Ship Weight

Power Outlet Requirement

MK 2

25 Hz 

32 Hz 

10 inches

200 Watts

30-90 Hz, bypassable

24 dB/Oct

low pass only

0.3 - 0.7

0°/180°

20˝(h)/14˝(w)/18˝(d) 

55 lbs

250 Watts

Содержание VTF-1 MK 2













Отзывы: