HLogic Security Technology Co., Ltd
www. hstfire .com Document Ref: M7033-04 Issue: 1.7 07/2017// Page 3 of 3
MAINTENANCE
This bell must be tested and maintained regularly.
Before testing, notify the proper authorities that the system is undergoing maintenance, and will temporarily be out of
service. Disable the system to prevent unwanted alarms.
The bell be cleaned at least once a year. Use a vacuum cleaner to remove dust from the cover.
LIMITED WARRANTY
We warrants the bell to be free from defects in materials and workmanship under normal use and service for a
period of three years from date of manufacture.
The Company’s obligation of this Warranty shall be limited to the repair or replacement of any part of the bell which is
found to be defective in materials or workmanship under normal use and service during the three year period
commencing with the date of manufacture.
After phoning HST technical support number for a Return Authorization number, send defective units postage prepaid
to HST local representative office. Please include a note describing the malfunction and suspected cause of failure.
The Company shall not be obligated to repair or replace units which are found to be defective because of damage,
unreasonable use, modifications, or alterations occurring after the date of manufacture.
HLogic Security Technology Co.,Ltd,
4F,Buiding B1,XinHaoSheng High-Tech Park,YongHe
Road FuYong Town,Baoan District,ShenZhen,China
17
7033CPR2016-05-16
EN54-3
HB101 Conventional Electric Alarm Bell
Fire detection and fire alarm systems installed in and around buildings.
According to Construction Products Regulation EU N° 305/2011
17
0359
Figure5: Mounting the bracket and install bell
Wall
Bracket
expansion
tube
Screw
Figure6: Locking the screw with cover of bell
Bell
Screwdriver
Enclosure
Screw
The wires from power supply
Bracket
Enclosure
