13
SHIPPING WEIGHT
Model: 220
USA
6.52 kg (9.62 lb),
Europe
13.68 kg (14.37 lb)
UNIT WEIGHT:
Model: 220
USA
3.54 kg (7.82 lb),
Europe
5.7 kg (12.57 lb)
ENVIRONMENTAL
Operating Temperature:
-10º C to 40º C
Storage Temperature:
-40º C to 50º C
Operating Elevation:
Sea level to 6000 ft. (0 m to 1900 m)
Operating Humidity Range:
0 to 95% (non-condensing)
Storage Humidity Range:
0 to 95% (non-condensing)
OPTIONAL ACCESSORIES
Mounting Bracket Hardware
Contact ATC for specifications and availability
Safety Regulations
This HSS device will meet or exceed the following safety requirements and regulations.
UL
UL Standard 6500
CE
OSHA
(USA) OSHA Technical Manual, Section III, Chapter 5, Section V, Table III:5-4
“TLV’s For Ultrasound”
FDA
(USA) American Technology Corporation (ATC) has submitted the applicable reports to the FDA pursuant to Title 21, CFR, sub-
chapter J as it pertains to ultrasonic devices for other than medical device applications. The abbreviated report is pursuant to
Section 1002.12 of the regulations. According to this report, the FDA has assigned the following Accession Numbers to HSS products:
0181485 and 0191486.
FCC
(USA) This device complies with Part 15 of the FCC Rules. This Class A digital apparatus complies with Canadian ICES-003.
Packaging Specifications
(USA) The packaging for HSS is suitable for common parcel shipment. It meets the International Safe Transit
Association Procedure 1A pre-shipment test specifications.
Structures and methods utilized in this system are patented under one or more US patents.
Additional US and International patents pending.
12
ULTRASONIC & DSP PROCESSING
Carrier Frequency:
approx. 48 kHz
Modulation Method:
Proprietary Dynamic Carrier
HSSound™:
Version 1.0
ULTRASONIC EMITTER
Type:
ATC proprietary PVDF Piezo Film device
AUDIO
Analog Input Section:
Input impedance: (real time unit)
10k
Ω
A/D converter:
16 bit
Input connector:
3.5mm female STEREO (tip, ring, sleeve) mini jack
Input channels:
Two # 1(Tip + Sleeve) # 2 (Ring + Sleeve)
System configuration:
Monaural (Two input channels summed together at input stage)
Nominal Input level:
1.0 V p-p, each channel.
Max Input level before clipping:
2.0 V p-p, each channel
System:
Bandpass Filtering:
400 Hz – 16 kHz
Max Audio SPL output:
See Measurement Section
Compression Ratio:
1.2:1
POWER AMPLIFICATION (ALL UNITS)
Amplifier Type:
Proprietary Class D – ATC ModAmp™
Amplifier Power Output Potential:
200 watts
Amplifier Efficiency:
>90%
ELECTRICAL
AC power cord length:
1.83 m (6 ft.)
POWER REQUIREMENTS
NOTE: Units are prewired for correct input voltage. Check rear panel for specific unit operating voltage
Wattage:
Model 220: 120 watts
MECHANICAL
Physical Dimensions: Depth (Front to Back) Height (Top-Bottom) Width (Left-Right)
Model: 220
88 mm (3.5 ”) 280 mm (11.0 ”) 280 mm
(11.0 ”)
HSS DIRECTED AUDIO SOUND SYSTEM
G E N E RAL S PE C I FI CATI O N S
/
SYSTE M M O D E L No.
R220A
