HSS Hire Horisont Stairway, Инструкция пользователя

Страница: 16 / 28

Horisont Safety Systems AB • Ängsgatan 11 • SE 828 32 Edsbyn
info@horisontsafety.se
Mainphone: +46 (0) 271-212 75
www.horisontsafety.se
Horisont Stairway Assembly
Assembling the handrail
It is advisable to mount the handrail before erecting the stairway. Mount
the handrail to the stairway by pushing the ends of the posts down into the
sockets on the steps. Make sure the posts go all the way down. Mount the
handrail with the curve on the upper rail at the top. Secure at least the up-
permost posts with R-pins or similar, through the hole in the post.
Jointing
All standard stairways can be joined to each other. First unscrew the four
jointing bolts from the lower side rails of the upper stairway. The stairways
must be opened to the same extent. Insert the pointed lower end of the up-
per stairway’s side rails into the lower stairways sleeve joints at the top of
the side rails. Fix the stairways together with the bolts. Join the handrails
by first removing the bolts and then pressing the upper handrail’s lower end
over the curved section at the top of the lower handrail. Screw the hand-
rails together with the bolts.
--- NOTE! ---
When stairways are joined, one of the latches must be unlocked and the
other locked. To disable a lock, remove one fixing bolt.
--- NOTE! ---
Max one joint per self-supporting stairway combination. If you need to
have more joints, you must use the Combibeam.
Erecting a stairway
Erection is easiest if you have access to a crane and two competent opera-
tives . Erection of a collapsed stairway is carried out as follows.
--- NOTE! ---
If the ground is loose, a hard surface should be arranged so that the point-
ed ends do not sink into the ground and freeze in place. Ensure that the
surface is level.
1.Connect the crane to a sling around the upper part of the stairway, put
the sling around a step and within the handrails, so that the handrail and
stairway are able to open. Make sure the sling is not around the centre of
the step, or it may be bent.