HSP STARIS Sia+ Скачать руководство пользователя страница 7

Страница: 7 / 53

Safety

The following safety information applies for the entire instructions.

2.1

Classification of the handling-relevant warning instructions

DANGER

This warning instruction indicates a dangerous situation, which will

inevitably

lead to a

severe or fatal accident if it is disregarded.

► Handling instruction for danger defense

WARNING

This warning instruction indicates a dangerous situation, which

may

lead to a severe or

fatal accident if it is disregarded.

► Handling instruction for danger defense

CAUTION

This warning instruction indicates a dangerous situation, which

may

lead to slight or

medium-severity accident if it is disregarded.

► Handling instruction for danger defense

NOTICE

This warning instruction indicates a dangerous situation, which may result in material

damage if it is disregarded.

► Handling instruction for danger defense

Information and tips

2.2

Intended use

In the event of non-intended use, dangers to life and limb and damage to the product and

other assets could be created.
The transformer bushings in the range

STARIS®-Sia+

(US market) are high-voltage

bushings for the integration in transformers and for use as outdoor bushings.

Range STARIS®-Sia+

7/53

Содержание STARIS Sia+






















































Результаты поиска

Содержание STARIS Sia+

Отзывы:

Похожие инструкции для STARIS Sia+

Бренды по названию

Популярные бренды

HSP STARIS Sia+, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание STARIS Sia+

Отзывы:

Похожие инструкции для STARIS Sia+

Бренды по названию

Популярные бренды