5.1.6 Mounting the electrode on the transformer side (option)
As an option, the bushing can have an electrode (see bushing specification).
If there is an electrode provided on the bushing, it must be mounted on the electrode holder.
Fig. 10: Structure of an electrode holder (here as an example with agile inner disk)
Item
Part
Item
Part
1
Opening to push through the electrode
4
Opening for insertion with inclination
2
Fastening slit
5
Outer disc
3
Brass pins
6
Inner disc
Three brass pins (3) are let into the electrode.
In order to install the electrode, it is guided into the relevant openings (4) in the outer disc (5),
together with its three pins, until the pins are in contact with the inner disc (6). The two discs
are then pushed apart by turning to the right.
Range STARIS®-Sia+
27/53
