HSM Pure 830, Руководство по эксплуатации, Страница: 16 / 160

16
HSM Pure 830 05/2015
english
This document shredder meets the applicable harmonisation legislation of the European Union:
• Low Voltage directive 2006/95/EU
• EMC directive 2004/108/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
10 Technical data
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi ed could result in less sheet capacity and increased noise during oper-
ation. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
Cutting type Strip cut Cross cut
Cut size (mm) 3.9 4.5 x 30
Security level DIN 66399 P-2, O-2, T-2, E-2 P-4, O-3, T-4, E-3, F-1
Cutting capacity * (sheets), A4 80 g/m
2
70 g/m
2
40 - 42
45 - 47 31 - 33
37 - 39
Weight 67.0 kg 72.0 kg
Cutting speed 110 mm/s
Intake width 330 mm
Power supply 230 V, 50 Hz 120 V, 60 Hz 220 V, 60 Hz
Power consumption
with max. number of sheets
2 100 W
Operating mode Continuous operation
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL) -10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Size W x D x H (mm) 579 x 548 x 954
Shredded material container volume 150 l
Sound pressure level emissions
(Idle running/ load)
60 - 62 dB(A) / 65 - 69 dB(A)