HSM HSM1802, Инструкция по эксплуатации

Страница: 18 / 93

03/2013
SECURIO B 26
17
english
9 Technical data
* HSM-speci fi cation
** The maximum number of sheets (DIN A4, 80 g/m²), fed lengthways, which can be cut in one cycle. The performance
data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage or a differ-
ent mains frequency to the one speci
fi ed could result in less sheet capacity and increased noise during operation. The
sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
Cutting type Strip cut Cross cut
Cut size (mm) 5.8 3.9 4.5 x 30 1.9 x 15 0.78 x 11 1 x 5
Security level DIN 66399 P-2 / O-2
T-2 / E-2
P-2 / O-2
T-2 / E-2
P-4 / O-3
T-4 / E-3
F-1
P-5 / T-5
E-4 / F-2
P-6 / F-3 P-7 / F-3
Security level DIN 32757 - 1 2 2 3 4 5 Level 6*
Cutting capacity** (sheets), A4 80 g/m 2 25 - 27 19 - 21 14 - 16 9 - 11 6 4
Weight (kg) 24,2 26,4 26,6 27,6 27,7
Cutting speed 65 mm/s
Intake width 280 mm
Power supply 230 V, 50 Hz 110 V - 120 V, 60 Hz 220 V, 60 Hz
Power consumption
with max. number of sheets
500 W 580 W
Operating mode
Continuous operation
Size W x D x H (mm) 497 x 397 x 676
Shredded material container volume 55 litres
Sound pressure level emissions
(Idle running/ load)
< 55 dB(A) / < 60 dB(A)
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG , Austraße 1-9, 88699 Frickingen / Germany hereby declares that the ma-
chine, referred to here as
document shredder
Securio B26
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical speci fi cations:
• EN 55014-1:2006 • EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 55014-2:1997 + A1:2001 + A2:2008 • EN 61000-4-4:2004
• EN 61000-3-2:2006 + A1:2009 + A2:2009 • EN 61000-4-5:2006
• EN 61000-3-3:2008 • EN 61000-4-6:2007 + Corr. Aug. 2007
• EN 62233:2008 • EN 61000-4-11:2004
• EN 60950-1:2006 + A12:2011
Frickingen, 10.1.2013
ppa. Hubert Kötzinger - Head of Environmental Engineering Product Development