HSM HSM1781, Руководство по эксплуатации, Страница: 18 / 93

11/2012 SECURIO B 24
17
english
9 Technical data
Cutting type Strip cut Cross cut
Cut size (mm) 5.8 3.9 4.5 x 30 1.9 x 15 0.78 x 11 1 x 5
Security level DIN 32757 - 1 2 2 3 4 5 Level 6*
Cutting capacity** (sheets), A4 70 g/m
2
80 g/m 2
28 - 30
25 - 27 22 - 24
19 - 21 17 - 19
14 - 16 11 - 13
9 - 11
7
6 5
4
Weight 18 kg 20.5 kg
Cutting speed 65 mm/s
Intake width 240 mm
Power supply 230 V, 50 Hz 110 V - 120 V, 60 Hz 220 V, 60 Hz
Power consumption
with max. number of sheets
500 W
Operating mode
Continuous operation
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Size W x D x H (mm) 395 x 317 x 605
Shredded material container volume 34 l
Sound pressure level emissions
(Idle running/ load)
56 dB (A) / 59 - 63 dB (A)
* HSM-speci fi cation
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG , Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the ma-
chine, referred to here as
document shredder
Securio B24
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical speci fi cations:
• EN 55014-1:2006 + A1:2009 • EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 55014-2:1997 + A1:2001 + A2:2008 • EN 61000-4-4:2004
• EN 61000-3-2:2006 + A1:2009 + A2:2009 • EN 61000-4-5:2006
• EN 61000-3-3:2008 • EN 61000-4-6:2007 + Corr. August 2007
• EN 62233:2008 • EN 61000-4-11:2004
• EN 60950-1:2006 + A11:2009 + A1:2010
Frickingen, 05.11.2012
I.V. Hubert Kötzinger - Head of Environmental Engineering Product Development
The machine type was tested for compliance with the requirements of the EC directives by:
TÜV SÜD Product Service GmbH, Zerti
fi zierstelle, Ridlerstrasse 65, 80339 München/Germany
This test centre is responsible according to the EC directives.
** The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.