HSM 1852121, Руководство по эксплуатации

Страница: 21 / 224

02/2017
HSM SECURIO P36i 21
english
Press the menu button , on the home screen to display and alter appliance settings. The
choice of available settings is displayed.
Information on the appliance and settings
SETUP
Service Information
Brightness Language
Technician
Select:
Service: Contact addresses for HSM and its subsidiaries
Brightness: Slide the control to adjust the brightness of the display.
Information: Shredder hours of duty and important appliance information
Language: Select a language for the display.
Technician: Password-protected access for HSM service technicians
The button takes you back to the home screen.
9 Cleaning and maintenance
Clean the document shredder only with a soft
cloth and a mild soap-water solution. However,
no water must enter the equipment.
WARNING
Dangerous mains voltage!
Improper handling of the machine can lead to
an electric shock.
Switch the shredder off before
relocating or cleaning it and
disconnect the mains plug.
Service work which requires the
housing covers to be removed may
only be carried out by HSM Cus-
tomer Service and service techni-
cians of our contractual partners.
See page 224 for our customer service
addresses.
Strip cut only:
Oil the cutting unit when
cutting performance
decreases or the device
becomes noisy, or every
time you empty the waste container. Only use
HSM special lubricating oil for the cutting unit to
do this:
• Spread the special cutting unit oil through
the paper feed along the entire width of the
cutting shafts.
• Let the cutting unit run in the permanent mode
for about 10 seconds without any paper.

Paper dust and particles are shaken off.
10 Disposal / Recycling
Electrical and electronic old devices
contain a variety of valuable materi-
als, but also hazardous substances
which were required for function and
safety. Incorrect disposal or handling
can be dangerous to your health and
the environment. Never dispose of old devices in
the household waste. Observe the current appli-
cable regulations and use the collection points
for returning and recycling electric and electronic
devices. Dispose of all the packaging materials
also in an environmentally-responsible way.