HSM 125.2, Руководство по эксплуатации

Страница: 14 / 72

14
Classic 125.2
06/2014
english
10 Technical data
Cutting type Strip cut Cross cut
Shred size ( mm) 5.8 3.9 1.9 3.9 x 30 1.9 x 15 0.78 x 11 1 x 5
Sa fe ty ra ting German DIN 66399 P-2 / O-2
T-2 / E-2
P-2 / O-2
T-2 / E-2
P-3 / T-2
E-2
P-4 / T-4
E-3 / F-1
P-5 / T-5
E-4 / F-2
P-6 / F-3 P-7 / F-3
Cutting ca pa ci ty* (Sheet), DIN A4 70 g/m
2
80 g/m
2
28 - 30
22 - 24 22 - 24
17 - 19 16 - 18
13 - 14 15 - 18
12 - 14 10 - 12
8 - 10
6 - 8
5 - 7 4 - 5
3 - 4
Cutting speed 120 mm/s 130 mm/s
Weight 26 kg 30 kg
Noise level (Idle running/ load) 60 dB(A) / 64 dB(A) 62 dB(A) / 64 - 70 dB(A)
Lo ading width 255 mm
Voltage 230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
Power for the maximum number of sheets 670 W
Operating mode Continuous operation
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL) -10 °C to +40 °C
max. 90 %, without condensation
max. 2,000 m
Dimensions W x D x H (mm) 448 x 347 x 828
Volume of shredded material bag 76 l
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG , Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the
design and construction of the supplied version of the machine HSM Classic 125.2 meet the fundamental health and
safety requirements of the following EC directives:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards:
EN 953 EN 1037 EN 1088 EN ISO 12100
EN 13849-1 EN ISO 13857 EN 55014-1 EN 55014-2
EN 60204-1 EN 60950-1 EN 61000-3-2 EN 61000-3-3
EN 61000-6-1 EN 61000-6-2 EN 61000-6-3 EN 61000-6-4
EN 62061
Frickingen, 2.6.2014
ppa. Hubert Kötzinger - Chief Technical Of fi cer (CTO)