14
Classic 105.3
01/2014
english
9 Technical data
Cutting type
Strip cut
Cross cut
Shred size (
mm)
5.8
3.9
1.9
3.9 x 30
1.9 x 15
0.78 x 11
Sa fe ty ra ting German
DIN 66399
P-2 / O-2
T-2 / E-2
P-2 / T-2
E-2
P-3 / T-2
E-2
P-4 / T-4
E-3 / F-1
P-5 / T-5
E-4 / F-2
P-6 / F-3
Cutting ca pa ci ty*
(Sheet) DIN A4
70 g/m
2
80
g/m
2
22 - 24
17 - 19
16 - 18
13 - 15
12 - 14
9 - 11
12 - 14
9 - 11
9 - 11
7 - 9
5 - 6
4 - 5
Weight
11.5 kg
12.5 kg
Cutting speed
80 mm/s
90 mm/s
Lo ading width
240 mm
Voltage
230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
Power
for the maximum number of sheets
440 W
Operating mode
Continuous operation
Dimensions
W x D x H (mm)
375 x 281 x 583
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Volume of shred. mat. container
33 l
Noise level
(Idle running/ load)
58 dB(A) / 59 - 63 dB(A)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi
ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
EC Declaration of Conformity
The manufacturer
HSM GmbH + Co. KG
,
Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the
design and construction of the supplied version of the machine
HSM Classic 105.3
meet the fundamental health and
safety requirements of the following EC directives:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards:
EN 953
EN 1037
EN 1088
EN ISO 12100
EN 13849-1
EN ISO 13857
EN 55014-1
EN 55014-2
EN 60204-1
EN 60950-1
EN 61000-3-2
EN 61000-3-3
EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 62061
Frickingen, 15.1.2014
ppa. Hubert Kötzinger - Chief Technical Of
fi
cer (CTO)