HSM 104.3, Руководство по эксплуатации

Страница: 13 / 68

06/2014
Classic 104.3
13
english
9 Technical data
Cutting type Strip cut Cross cut
Shred size ( mm) 5.8 3.9 1.9 3.9 x 30 1.9 x 15
Sa fe ty ra ting German DIN 66399
P-2, O-2,
T-2, E-2
P-2, T-2,
E-2
P-3, T-2,
E-2
P-4, T-4,
E-3, F-1
P-5, T-5,
E-4, F-2
Cutting ca pa ci ty* (Sheet) DIN A4 70 g/m
2
80 g/m
2
22 - 24
17 - 19 16 - 18
13 - 15 12 - 14
9 - 11
12 - 14
9 - 11
9 - 11
7 - 9
Weight 11,5 kg 12,5 kg
Cutting speed 80 mm/s 90 mm/s
Lo ading width 240 mm
Voltage
230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
Power for the maximum number of sheets 440 W
Operating mode Continuous operation
Dimensions W x D x H (mm) 375 x 281 x 583
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL) -10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Volume of shred. mat. container 33 l
Noise level (Idle running/ load) 58 dB(A) / 59 - 63 dB(A)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG , Austraße 1 - 9, 88699 Frickingen / Germany hereby declares that the
design and construction of the supplied version of the machine HSM Classic 104.3 meet the fundamental health and
safety requirements of the following EC directives:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards:
EN ISO 13857 EN 55014-1 EN 55014-2
EN 60950-1 EN 61000-3-2 EN 61000-3-3
Frickingen, 2.6.2014
ppa. Hubert Kötzinger - Chief Technical Of fi cer (CTO)