OPERATING INSTRUCTIONS
Use on Alternating Current (60/50 hertz) only. Standard flat irons are designed to
operate at 110-220v 60/50Hz. This appliance has a polarized plug (one blade is wider
than the other). As a safety feature, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to defeat this safety feature. Use of this flat
iron on the same circuit or fuse with other electrical products or appliances may trip a
15 amp circuit breaker or blow a 15 amp fuse. NEVER replace the fuse with one rated
higher than the capacity of the circuit. Doing so could result in an electrical fire.
Important Information
This model may come with a fused plug with a reset button. If for some reason the
iron does not turn on, please press hard on the reset button.
Adjustable Temperature
HSI ceramic iron has an adjustable thermostat. To prevent hair damage, make sure to
use the proper temperature for your hair type. Keep the iron moving along the strand
of hair being straightened to avoid damage from excess heat.
Take extra care when using a professional styler.
Changing The Temperature
To set the temperature
1.
Press on power button turn on or off.
2.
After turning the iron on, use the (+) and (–) buttons to select your desired
temperature.
3.
The digital screen will appear blue while the product is heating and turn green
when it is ready for use.
Temperature Display
To Change Temperature Display From Fahrenheit to Celsius press and hold the (+)
button until the temperature display changes.
Sleep Mode
To activate sleep mode, press and hold the (–) button. The LCD screen will turn red
and display 00. Press the (+) button to choose how long the product should wait
before entering sleep mode with 10 minute increments.
To turn sleep mode off, simply press and hold the (–) button until 00 is displayed on
the LCD screen.
4
