HSGM
Heißschneide-Geräte
u.- Maschinen GmbH
HSGM GmbH
Phone : +49 (0) 6123 9978-0
B-1-VW-GB.DOC
In der Rehbach 13
Fax : +49 (0) 6123 9978-40
Status: 15.11.2016
D-65396 Walluf
Email: [email protected]
Printed: 05.01.2018
http://www.hsgm.com
Page: 3
In commercial establishments, the accident prevention regulations of the health and safety executive for electrical
installations and equipment must be observed.
Functional description
The device is suitable for cutting and simultaneously sealing the edges of cord, ropes, cables, belts and braided sleeves
made of fully synthetic fibres such as polyamides, polyacrylonitrile, polyester, polyethylene etc.
The cutting blade is directly electrically heated to approx. 600°C in 6 to 8 seconds by a safety transformer.
Any
thermoplastic material that comes into contact with this cutting blade melts.
Commissioning
Power cord with
safety plug
Illuminated on/off
switch
Power control dial
= temperature dial
Power cable
Side bracket
Blade holder M
When working in rooms, the vapours that arise on the cutting blade during cutting must be removed
directly using an extractor fan. Or only work in well-ventilated rooms.
PVC and PVC-coated materials may not be processed due to the harmful vapours arising during
cutting.
Pay attention to the risk of burns when using the device!
The cutting blades can reach temperatures of approx. 700° Celsius. Do not touch the cutting blades
once you have switched the device on. Do not lean the blade holder against objects before the
cutting blade has cooled down completely.
Danger! Danger to life due to electric shock!
A fatal electrical shock can result if water gets into the housing.
Keep the device away from water.
If water does get in, pull the plug out immediately and do not continue to use the device.
