- 8 -
3 Function
The NetBee Socket Tray is designed to manage the sockets used on tools and wrenches.
Operation mode:
• All the sockets must be present on the tray.
• Only one socket must be taken at a time, according to the parameter (socket number) of
the tightening operation.
• If the wrong socket is taken, the tightening operation is not started.
NetBee
• NetBee defines the sequence of the assembly process, and checks that the operator
takes the correct socket from the tray
Refer to the NetBee user manual for more information.
NOTE
The NetBee Socket Tray does not start automatically a tightening operation
or a sequence when the socket is removed from the tray. NetBee starts the
operation and makes a check on the socket.
