manualshive.com logo in svg

HS Automatic HSAjet-CU, Руководство пользователя

Поделиться
Скачать
HS Automatic HSAjet-CU Скачать руководство пользователя страница 12

HS Automatic ApS 

Side 11 af 41 

17-11-2005  

HSAjet-CU user manual 

 

Last saved 

Fejl! Ukendt argument for parameter.

 

Using the CU 

The idea of the CU is a unit that will allow the user to select messages and print them using the 
standard HS Automatic printers – xaar or HP. 

The messages are stored on the compact flash, and can be recalled by simply selecting the 
filename from the main menu and pressing enter to load. 

In each message, there can be both static and variable content. All variable fields can be edited by 
pressing the corresponding object type key. 

Basics 

You have two different ”cursor modes” in the machine: editing and moving. When you enter a 
menu, the cursor is in move mode. From here, you use the arrow keys to move between menus, 
commands and fields.  

If you press enter on a field, you will activate edit mode 

Edit mode 

•

 

Enter

  activates your selection or starts edit mode.  

•

 

Esc

 cancels the editing  

•

 

Insert

 toggles between insert / overwrite  

•

 

Delete

 removes the character under the cursor 

•

 

Arrow up / arrow down

 chooses the values just above / below the current.

 

•

 

Alt/Space with some letters

 will type european characters (Latin-1), such as á, ø, ú…

 

Navigation 

At any point it is possible to jump directly to other sections by using the object keys. If you are in 
edit mode, this is considered as ESC.  For example, you could have finished editing a text object, 
then it is possible to jump directly to date editing by pressing the ”Date object” key. 

Password protection 

It is possible to change setup values (print parameters) from the unit, but this menu can be 
protected by a password. 

 

Содержание HSAjet-CU












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды