Compact CAT5 Audio/Video Splitters and Receiver
5. Connect the remote monitor and speakers to the receiver unit and
attach the power adapter to the receiver
Figure 2.4
Figure 2.5
CAUTION
Before plugging in the remote monitor, verify that the AC line is properly
wired and that a protective ground (green) wire is established with NO
potential difference between both the sender and receiver locations (The
splitter can tolerate up to 5 v peak-to-peak ground noise between the two
locations) . Failure to ensure good grounding can result in erratic operation
and possible shock hazards or damage to your equipment.
NOTICE
Do not connect this unit to any LAN device such as network cards or hubs
as this may damage the UVA/URA and/or the LAN device. Use EIA/TIA 568B
standard straight-through patch wiring as shown below. Do not use
crossover cables.
EIA/TIA 568B WIRING STANDARD
PIN
Wire Color
1
White w/ Orange Stripe
2 Orange
3
White w/Green Stripe
4 Blue
5
White w/Blue Stripe
6 Green
7
White w/Brown Stripe
8 Brown
6
