- 2 -
6. Basic programming
Pressing the
C key
briefly opens the controller settings. To switch
between the individual items, use the
C key;
to make changes, use the
+ and – keys.
The programming can be quit at any time by pressing the
M key
, but is
also quit automatically if no key is pressed for 10 seconds. The changed
values are accepted automatically.
Press the C key briefly once.
Setting the time
A clock symbol is displayed; use the
+
/
-
keys to set
the time.
Press the C key briefly once.
- with automatic setting of daylight saving time
Set the calendar year
A "
Y
" is displayed;
use the
+
/
-
keys to set the calendar year.
Press the C key briefly once.
Set the month / day
A "
D
" is displayed;
use the
+
/
-
keys to set the date.
Large digits: Month / small digits: Day
- without automatic setting of daylight saving time
Set the day of the week
A number for the day of the week is displayed;
use the
+
/
-
keys to set the day.
1 = Monday.... 7 = Sunday
Press the C key briefly once.
Automatic daylight saving can be turned on / off in the display menu.
Setting the temperature reduction
A moon
and a thermometer
symbol are displayed;
use the
+
/
-
keys to set the temperature by which the
temperature is to be reduced between the warm
phases.
Setting range: 3° - 15° C
Factory setting: 3°
Press the C key briefly once.
Setting the monitor temperature
(only in the "Room controller with monitoring " mode)
A detector symbol
is displayed;
use
the
+
/
-
keys
to
set
the
maximum
floor
temperature.
Setting range: 20° ... 40° C
Factory setting: 28°
Press the C key briefly once.
Programming the warm phases
The controller can be operated in either the block or single-day mode. If
block mode is programmed, the same timer program is executed on
each of the working days 1 to 5 (1 = Monday, 2 = Tuesday, etc., see
digits in the top line of the display) and thus only needs to be entered
only once. A different timer program can be entered for the weekends -
days 6 and 7 (Saturday and Sunday). The possibility to use simply two
blocks saves a great deal of programming work.
Factory setting:
1st warm phase: 6 a.m. - 10 p.m.
2nd warm phase: Not programmed
The individual programming modes are switched in the display menu.
Programming example for the block mode
Start of the 1st warm phase on weekdays:
The days 1 - 5 are shown on the display together with a
sun symbol
with index 1.
Press the C key briefly once.
End of the 1st warm phase on weekdays:
The days 1 - 5 are shown on the display together with a
moon symbol
with index 1.
Press the C key briefly once.
Start of the 2
nd
warm phase on weekdays:
The days 1 - 5 are shown on the display together with a
sun symbol
with index 2.
Press the C key briefly once.
End of the 2
nd
warm phase on weekdays:
The days 1 - 5 are shown on the display together with a
moon symbol
with index 2.
Press the C key briefly once.
Start of the 1
st
warm phase on weekends:
The days 6 and 7 are shown on the display together with
a sun symbol
with index 1.
Press the C key briefly once.
End of the 1st warm phase on weekends:
The days 6 and 7 are shown on the display together with
a moon symbol
with index 1.
Press the C key briefly once.
Start of the 2
nd
warm phase on weekends:
The days 6 and 7 are shown on the display together with
a sun symbol
with index 2.
Press the C key briefly once.
End of the 2
nd
warm phase on weekends:
The days 6 and 7 are shown on the display together with
a moon symbol
with index 2.
Programming example for the single-day mode
Single-day programming is performed in the same way as block
programming. The individual weekdays are shown as numerals in the top
line of the display.
(1 = Monday, 2 = Tuesday, etc.)
.
.
.
.
.
End of basic programming
