HIROSE ELECTRIC CO.,LTD.
ETAD-T0940-00
0
16
/
48
FORM HC0011-9-2
△
8.
REPAIR PROCESS
1
– Insert the special tool in direction 1 and push down the lance, and remove the retainer
from direction 2.
Note: Please refer to the next section (§9) for details on the special tool.
1
2
2
Jig □1mm max
Jig □0.6mm max
Connector cross section
Connector cross section
Mar.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.