HIROSE ELECTRIC CO.,LTD.
ETAD-T0940-00
0
13
/
48
FORM HC0011-9-2
△
※
Please hold the cable as below picture and insert it with a force less than 10 N, or terminal
will be deformed. Please use a new terminal in this case.
2
– After insertion, confirm that the terminal has been inserted correctly by pulling the cable
lightly, the pulling force must be less than 10N.
OK
NOT OK
Crimping portions are facing outward
Barrel becomes visible from outside
when cable is pulled lightly
Crimping portions are facing inward
Incorrect terminal position
Correct terminal position
Mar.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.