9
Care and Maintenance
The R3X Isolation Base is a very low maintenance item that will provide many
years of trouble free performance by applying these basic care instructions.
Clean the surfaces of the R3X using a lint-free soft (non-abrasive) cloth. If needed
use a cloth lightly damped with water. Do not use any solvents and do not use any
abrasive cleaners or abrasive materials on any part of the isolation base.
Do not spray, soak, or submerge the isolation base in water or any cleaning
solutions. The isolation base is an assembly of many different parts and materials.
Submerging the isolation base will cause permanent damage to the assembly.
Do not wash the interior flex element of the isolation feet even if you see a
coating or white substance on the surface of the flex element. This coating is
intentional and is put in the flex element to protect the custom isolation material
from the environment.
Warnings!
Do not place objects with sharp or pointed feet directly on the isolation base.
Do not immerse in water or spray with water or any other liquids.
Do not use abrasive cleaners or abrasive sponges.
Do not wash the base or isolation feet with any solvent based cleaning solutions.
Do not wash the interior flex element of the isolation feet even if you see a
coating or white substance on the surface of the flex element.