TITLE
:
GT50 Series Guideline
REVISION DATE
:
HIROSE ELECTRIC CO.,LTD.
OBJECT
PRODUCT
:
GT50 SERIES
Figure number
ETAD-T0931-00
PAGE:
11
OF
13
5.3 Precautions when Mated
When mating, make sure that the receptacle is not subject to a strong load of 25N or more.
(Prying, pulling, etc.)
The receptacle may peel off from the board or the plug may come off.
5.4 Harness Condition
■When the harness length is short
If the harness length is too short(Less than 50mm) as (shown) figure below, there is a risk that
a load will be applied to the connector due to twisting of the cable, therefore confirm the
orientation of the connectors at both ends. (Please consider the mounting direction and
manufacture the harness.)
Apr.1.2022 Copyright 2022 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
