HRS GT36A Скачать руководство пользователя страница 6

Страница: 6 / 7

HIROSE ELECTRIC CO.,LTD.

ETAD-T0401-01

FORM HC0011-9-2

△

4. Connector Engagement Procedures

①

Adjust the direction of the notch of the board-side connector to that of the cable pullout side of

the harness-side connector.

②

Insert the connector until it is locked and a click sound is heard.

* After completion of work, pull the connector in the disconnection direction and make sure that it
does not come out.

The above figure shows the unfinished engaged condition.

The above figure shows the engaged condition.

Engagement
direction

Notch

Cable pullout side

Содержание GT36A

Страница 1: ...ADA 20190311 名称 TITLE INSTRUCTION MANUAL FOR GT36A CONNECTOR APPROVED KI HIROKAWA 20171128 CHECKED KI HIROKAWA 20171128 DESIGNED KJ OBINATA 20171128 WRITTEN KJ OBINATA 20171128 TECHNICAL SPECIFICATION ETAD T0401 01 1 1 7 FORM HC0011 9 1 HIROSE ELECTRIC CO LTD Oct 1 2022 Copyright 2022 HIROSE ELECTRIC CO LTD All Rights Reserved ...

Страница 3: ...length See below for the dimension L after wiring and the cable cutting length Cable cutting length Ｌ１９６Ｌ２１７５ 2 Crimping terminals Refer to the terminal instruction manual for the terminal crimping procedures and crimping quality standards ETAD T0392 01 ETAD T0400 01 Oct 1 2022 Copyright 2022 HIROSE ELECTRIC CO LTD All Rights Reserved ...

Страница 5: ...the GT36A cover into the GT36A housing until it is engaged with the housing engagement and a click sound is heard Make sure that it is engaged with the engagement Housing engagement Engagement Cover Oct 1 2022 Copyright 2022 HIROSE ELECTRIC CO LTD All Rights Reserved ...