TITLE
:
BM25 Series Guideline
ETAD-H1018-00
PRODUCT
:
BATTERY BOARD TO FPC CONNECTOR,
Pitch: 0.4mm, Width: 2.6mm,
Stacking height: 0.7mm, Power: 10A
PAGE:
3
OF
19
HIROSE ELECTRIC CO.,LTD
1. Notice for Device Design
1.1 Notice for mechanical designing
1-1.a
Disengagement prevention
Please use buffer material.
There is still possibility that connectors are disengaged if strong impact, such as dropping, is put against
connectors in use. In order to prevent connectors from disengaging, please make sure to put buffer material
between a connector and a cover case to hold down the connector pair to the mating direction.
If a connector is directly pressed down by a cover case, there is a possibility that the cover case is bent
and it may cause connector disengagement when the device is dropped. Please avoid a design that the
connector is directly pressed by cover case, instead, use put the buffer material to press down the
connector.
Buffer material must be the size which is able to cover all over the connector mounting area.
×
Nov.1.2021 Copyright 2021 HIROSE ELECTRIC CO., LTD. All Rights Reserved.