General Information
7
3. a, Lay the float plate on the ground with the HQUA logo facing up.
b, Place the fountain pump into the center of the float. Make sure the wire is covered
by the float.
c, Place all the accessories according to the order in Fig. 3. First is the “puzzle plate”,
and the gasket, thread fastener, the nozzle, the last is another fastener.
d, Lift the float straight up and ensure the cord is under the float. Put it into the water
edge.
4. Fix the other side of the rope with
the stakes by the cable clamps.
And fix the stake. You could adjust
the cable clamps later to moor the
float later.
Fig. 3
Fig. 4
