5. Manual Tuning Mode
Manual tuning is aimed for adjust frequency deviation, power, sensitivity, and
noise elimination, etc.
Note: Before enter the manual tuning mode, read the radio settings into the
computer first using the programming software, and then go to program manual,
modulation mode, choose manual tuning mode, close current widow and write
in modulated setting from the computer to the radio. This will enable you to
enter the manual tuning mode.
(1) To enter the mode:
Press [PTT+Moni] to turn on the power, keep it in 2 seconds until LED flashes
twice in green, release to get into manual tuning mode.
No. Items
Turning
up
procedure
Work
frequency
Version Display
Press[0] to turn on
Press[0] to turn on, input password:
1
Initialization
Password
：
777702
2 Aging
program
Password
：
777703
(UHF Rx: 4s
，
VHF Rx: 4s
；
UHF Tx: 4s
，
VHF Tx
4s
；
Standby 16s)
Rx
U:421.115MHz
V:141.115MHz
Tx
U:431.115MHz
V:151.115MHz
Password
：
777705
Low power Adjust (the
low frequency)
Press [1]
Low power Adjust (the
high frequency)
Press [2]
Middle power Adjust
(the low frequency)
Press [3]
Middle power Adjust
(the high frequency)
Press [4]
High power Adjust (the
low frequency)
Press [5]
High power Adjust (the
high frequency)
Press [6]
Low
frequency
：
the
lowest
frequency
High
frequency
：
the
highest
frequency
3
VOX Press
[7]
4
7.5V Voltage
calibration
Password
：
777706
Press [Enter] to confirm