PoC Radio User Manual
4
Long press the
key to enter “Group Selection Mode” and select a group by rotating the
Selector Knob (or pressing the
key and
key), press PTT button
to confirm and
enter the selected group.
6. Programmable Key Control
Long press the
key to turn on the radio and release it when LED glows red, this enables
to lock and unlock the Selector Knob.
Long press the
key to turn on the radio and release it when LED glows red, this enables to
turn on/ off Call Start/ End Tone.
7. Network Settings (Only applicable to E series)
To switch network between 2G and 3G, press the
button when the radio is turned off and
turn on the radio, release the
button when a sound of “du” is heard.
Press the “Menu” key and select “Network Settings” to switch network among 2G, 3G and Auto,
it indicates 2G/ 3G network auto switch when “Auto” is selected and “AT” is displayed on the
top left corner of the screen.
8. Status Query
Press the
key in standby mode, there would be voice prompts of battery power/ device
name/ network.
Press the
key in standby mode, there would be voice prompts of current group/ number of
online member.
9. Setting an Emergency Contact
Press the “Menu” key and select “Select Member”, press the “Menu” key to enter and select a
member by pressing the “
∧
” and “
∨
” keys. Long press the
key for 2 seconds after
selecting the desired member, and it means the emergency contact is set successfully when
there is corresponding voice prompts.
Exit emergency contact call by pressing any key except the
button.
10. Setting an Emergency Group
Press the “Menu” key and select “Select Group”, press the “Menu” key to enter and select a
group by pressing the “
∧
” and “
∨
” keys. Long press the
key for 2 seconds after
selecting the desired group, and it means the emergency group is set successfully when there
is corresponding voice prompts.
Exit the call by pressing any key except the
button.