2
ENGLISH
4-Port HDMI® Switch With Ethernet
Introduction:
This is a digital audio/video switching device. It switches and transmits audio/video signals for devices
that have a HDMI® interface. With this device there are no cables needed and no complex control is
required. This device allows users to enjoy high quality audio/video. Internet access functionality is
guaranteed via each device that is connected with a High Speed HDMI® Cable with Ethernet function
on port 1 (of course your home network must be connected to the internet).
Features:
• HDMI® input connector: 4x HDMI® type A 19pin female.
• HDMI® output connector: 1x HDMI® type A 19pin female.
• High Speed HDMI®-cable with Ethernet and Audio Return Channel (ARC).
• HDCP 1.2 compliant: any switch must pass HDCP data between source and monitor.
• Operation function: Push button or remote control.
• Supports: up to Full HD 1080p, 24 fps & 50/60 Hz.
• Supports all 3D formats, including [email protected]/24 Hz, [email protected]/60 Hz/50 Hz, bandwidth up
to 225 MHz.
• Supports Audio Return Channel (ARC) from sink device. Connect ARC port to amplifier receiver
(only functional on port 1).
• Supports: Deep colour 24bit/36bit.
• Support: LP CM/Dolby-AC3/DTS7.1/DSD.
• Data transfer speed 6.75 Gbps.
• Plug and play. No software installation required. Installs in minutes.
Setup description:
• Connects a HDMI® Cable to the HDMI® interface connector of an output device such as a
DVD-player or set-top box.
• Connects the other end of the HDMI® Cable to the input port of this switch. Remembers which
input port is connected to which device.
• Connect the ARC/Spdif port to your Home cinema set for audio.
• Connect the internet connection to your home network switch/router.
• Turn on the devices and TV and make your selection to view your choice of device.
Connections:
1. HDMI® output
2. Spdif connection
3. HDMI® input port 1~4
4. Power connection
5. Ethernet connection
6. Audio connection
7. Infrared connection
8. Infrared extension
9. Infrared LED
10. Input information LED
11. Output information LED
12. Push buttons for selection left and right
Operation description:
A choice can be made by pushing the selection button on front of the switch, or by selecting the
appropriate button on the remote control. An indication light will burn for the selected input channel.
Left side
Back
Right side
Front
