VDPLP3601VW
12.01.2011
©
Velleman nv
7
DMX Channel Values
2-Channel Mode
channel function from
to
description
1
warm white
000
255
0 ~ 100%
2
cold white
000
255
0 ~ 100%
3-Channel Mode
channel function from
to
description
1
master dimmer
000
255
0 ~ 100%
2
warm white
000
255
0 ~ 100%
3
cold white
000
255
0 ~ 100%
7-Channel Mode
channel function from
to
description
1
master dimmer
000
255
0 ~ 100%
2
warm white
000
255
0 ~ 100%
3
cold white
000
255
0 ~ 100%
4 strobe
000 009
strobe
off
010
255
strobe 0 ~20Hz (slow ~fast)
5 auto
programs
000 051
no
function
052
101
auto program 1
102
152
auto program 2
153
203
auto program 3
204
254
auto program 4
255
-
auto program 5
6 speed
000
255
speed of auto programs (slow ~ fast)
(when
CH7
= 052 ~ 255)
7 dimmer
000
051
default dimmer speed
052 101
linear
dimmer
102 152
non-linear
dimmer
1
153 203
non-linear
dimmer
2
204 255
non-linear
dimmer
3
Master/Slave Mode
This mode allows control several units simultaneously.
•
Use standard DMX cables to daisy-chain your units together via the DMX connector on the rear of
each fixture. For longer cable runs we suggest using a terminator on the last fixture.
•
Choose the first unit in the chain to function as the master fixture. Press <MENU> and choose a
mode (
,
or ).
•
On each of the connected slave units, set the same channel mode as the master (via
).
•
Set the DMX address of all slave units to 1 (
).
8.
Cleaning and maintenance
•
All screws should be tight and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections …
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
•
Regularly remove dust from the housing and the air vents using a slightly damp cloth.
•
There are no user-serviceable parts inside. Refer to an authorized dealer for service and/or spare
parts.
Fuse Replacement
•
Remove the fuse holder
[6]
with a flat-head screwdriver.
•
Remove the damaged fuse from its holder and replace with exact same type of fuse.
•
Screw the fuse holder back in its place and reconnect power.
