VDP200OA9
5
VELLEMAN
e. Function selection
Different functions can be set by means of the 5 push buttons and the display. When you turn on the fixture the
display setting will be the same as the setting before you turned it off.
Procedure:
•
press UP or DOWN button to select a different function
•
press ENTER to confirm the selected function, the display will show
"PASS"
•
select it to be on or off using the NO or YES button (No= up and YES= down while in DMX start address
selection mode)
•
press ENTER again to confirm your settings
•
press EXIT/DN to save the setting and exit the menu
Please refer to the list below for the different settings:
Channel
F1
F2
F3
F4
1
pan
pan
pan
pan
2
tilt
pan (16bit)
tilt
tilt
3
pan (16 bit)
tilt
speed
colour
4
tilt (16 bit)
tilt (16 bit)
colour
gobo
5
speed
speed
gobo
gobo rotation
6
colour
colour
shutter
shutter
7
gobo
gobo
gobo rotation
8
gobo rotation
gobo rotation
9
shutter
shutter
Function
Corresponding function
F5
pan
N
Y
F6
tilt
N
Y
F7
setup
N
Y
F8
music control
N
Y
F9
auto program
N
Y
FA
master – slave mode
N
Y
FB
no function
N
Y
FC
display up/down
N
Y
6. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections …
3. Mechanically moving parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
