HQLE10060
V. 02
–
21/10/2021
9
©Velleman Group nv
•
When all devices have the same address, all the units will “listen” to the control signal on
one particular channel. In other words: changing the settings of one channel will affect all
devices simultaneously. If you set
individual addresses, each device will “listen” to a
separate channel number. Changing the settings of one channel will only affect the device
in question.
Refer to page 3 of this manual for the DMX channel values.
5.6
Remote Control
Black Out
Press this button to black out the current active mode. Press again to return.
Auto
1.
Press <AUTO> to enable the auto mode.
2.
Press <+> or <-> to choose the different programmes.
3.
Press <AUTO> to disable.
Sound
1.
Press <SOUND> to enable the sound mode.
2.
Press <+> or <-> to choose the different programmes.
3.
Press <SOUND> to disable.
Strobe
1.
Press <STROBE> to enable the strobe mode.
2.
Press <+> or <-> to choose the different programmes.
3.
Press <STROBE> to disable.
Speed
1.
Press <SPEED>.
2.
Press <+> or <-> to adjust the programme speed.
Sensitivity
1.
Press <SENSITIVITY>.
2.
Press <+> or <-> to adjust the microphone sensitivity.
DMX/%
Allows you to activate/de-activate the DMX mode.
Manual
1.
Press <MANUAL>.
2.
Press <R>, <G> <B> or <W> to select your colour.
3.
Press <+> or <-> to select the static colours.
Fade/Unit
1.
Press <FADE/UNIT>.
0: all units on-off
1: BAR on-off
2: DERBY 1 on-off
3: PAR 1 on-off
4: PAR 2 on-off
5: DERBY 2 on-off
2.
Press <FADE/UNIT> to exit.
1-9
Press <1> to <9> to adjust the colour intensity.