HPRT TP808, Руководство пользователя

Страница: 32 / 33

TP808 User Manual
28
6.4 Problems Emerge During the Paper Cutting
Problem
Description
Probable Reason Resolution
Cutter jam, the
movable cutter
cannot back
Cutter abrasion,
insufficient cutting
Replace the cutter
Worm gear and worm
wheel abrasion
Replace the worm gear and worm wheel
Motor burnt Replace the motor
Paper scraps
Clean the paper scraps on the transmission
system
Insufficient cutting
Cutter edge abrasion,
paper too thick
Replace the cutter
Paper jam
Thermal printer head
over heat
Reduce the density of printing
Driving too fast
Reduce the printer speed to the limit of
thermal printer head
Wrong paper feeding
position
Put the paper parallel with the paper mount
and insert into the space between platen roller
and the thermal printer head.
NOTE: The density of setting, please refer to "Utility Tool Manual"
6.5 Removing Jammed Paper
Warning :
Do not touch the thermal print head because it becomes very hot after printing.
If the printer cover can be opened, operate it according to the next steps.
1)Turn off the printer and pull open cover button.
2)Remove jammed paper, reinstall the roll, and close the printer cover.