9
device ), angel should be less than 30
°
.
3.3.3 Bluetooth
Hand terminal, notebook and other intelligence terminal drive to printer through Bluetooth.
Methods:
1.
Add Bluetooth device through click Bluetooth icon with your mouse right button on
Bluetooth control panel.
2.
Find new device
MPT-II
.
3.
Click
‘next’ and enter your password ‘
0000
’ , then finish.
4.
The system will display interface added, one interface is output interface, the other input
interface.
3.4 LED indicator and Buzzer definition
There are one buzzer and two LED indicators to indicate the printer status. LED indicators
indicate current status and buzzer indicates the changes of status.
LED indicator
（
blue
）
LED indicator (red
）
Status
Buzzer
Flash quickly
Dark
Charging
Flash slowly
Dark
Out of power
Continuously bright
Dark
Charging end
Dark
Bright continuously
Working
Flash slowly
Flash slowly
Paper end
Warning
Dark
Flash slowly
Standby
Chapter 4 Other information
4.1 Printer technical manual
Please refer to MPT-II technical manual.
4.2 Preprinted black mark specification
If user wants to locate receipt by detecting preprinted black mark, shall accord to the
following specification for the black mark. Otherwise it may cause printer can
’t recognize
the black mark.
Printing position: black mark shall preprint at the left side of receipt.
Width rang
：≥
7mm
Height
：
4mm
≤
height
≤
6mm
Reflection rate to IR
：
<10%
（
reflection rate to the black mark on paper >65%
）
Hps
：
Hps indicates the distance from down edge of detecting mark from beginning line.
0mm
≤
Hps
≤
1mm
