08_2017 LE10388AAA
HPML1701
Warranty
Legrand warrants this product for a period of 1 year from the date of purchase when used
in accordance with these instructions and considering the disclaimers listed herein.
These goods come with guarantees that cannot be excluded under the Australian and
New Zealand Consumer Laws. You are entitled to a replacement or a refund for a major
failure and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
See the Warranty card enclosed with this product for further details.
Customer Service
For all Customer Service and Technical Support
please call Monday to Friday during business hours.
Legrand Australia
1300 369 777
www.hpm.com.au
Legrand New Zealand
0800 476 009
www.hpm.co.nz
ABN: 31 000 102 661
9 Accessories
Outdoor Garden Cables:
RGL8 (2-core 1.3mm² 10m length)
RGL9 (2-core 1.3mm² 20m length)
RGLCL21/20 (2-core 2.1mm² 20m length)
RGLCL21/30 (2-core 2.1mm² 30m length)
RGLCL33/30 (2-core 3.3mm² 30m length)
RGLHSC15 (2-core 0.5mm² 15m length)
Connectors:
CDGLCC4 (pack of 4 cable connector)
Transformers:
RGLTR60
RGLTR105
RGLTR220
RGLTR400
RGLPCTAW20
Sensor & Timers
(Compatible only with 60VA -200VA transformers)
RGL10 (200W sunset timer)
DGLS150 (150W dusk to dawn sensor)
10 Troubleshooting
11 Maintenance
To prolong the life of your Gardenlights HPM recommends the following:
• Install away from salty or corrosive environments
• Install away from highly fertilised areas
• Do not sudmerse in treated water such as chlorinated pools
To keep your lights looking new, keep lenses free of dust and residue by wiping occasionally with a dry cloth, or warm soapy water if necessary.
If using soapy water, ensure that you thoroughly dry your light after cleaning.
Problem
Possible Solution
The powerpoint is turned on,
but the lights are off.
1. The connections at the base of transformer may be loose. Tighten firmly
2. There is no power to the powerpoint, (Consult an electrician).
3. You may not have pierced the cable well enough with the metal spikes in the jaw-lock connectors. Check that
the cable insulation has been fully pierced by the spikes.
Some lights are working, one or
more are not.
1. If one or more of the lights are not working, first check the connection of the light to the cable (See
‘Connecting your garden lights’ section). If this is firm, check the globes by putting the ‘non-working’ globes
into a working fitting. Replace unserviceable globes, (If applicable).
One or more lights flicker.
1. The connection to the light is loose. (See ‘Connecting your garden lights’ section).
2. The globe is loose. Push in firmly, (Watch out that globe is not hot). (HPM recommends paper or cloth be used
to handle the globe).
