Instruction Manual
360° PIR Movement Sensor
Cat No. 630R02WE, 630S02WE
This product must be installed by a licensed electrician.
1. Specifications
Detection method
Passive Infrared (PIR)
Supply voltage
230-240V a.c. 50Hz
Terminal wiring size
1x2.5mm
2
to 2x1.5mm
2
Standby power
0.6W
Detection/View angle
360°
Detection range (ceiling height 2.5m)
Ø8m
Lux adjustment range
10lux – 1275lux
Time adjustment range
10sec – 10min (approximately)
Switching function
Auto Mode only
Overall dimensions
630R02WE
630S02WE
Cut-out size
Ø65mm
n.a.
Fascia size
Ø78mm
Ø90mm
Depth
50.5mm (overall) 39mm (into ceiling)
52mm
Mounting centres
n.a.
79mm
IP rating
IP41
IP20
Weight
71g
90g
Maximum Lighting Load
Incandescent
1000W (4.3A)
Fluorescent
360W (2.1A)
Extra low voltage halogen
500VA (2.1A)
Compact Fluorescent Lamp (CFL)
250VA (1.1A)
LED
250W (1.1A)
2.5m
4m 2m 1m 0 1m 2m 4m
Ø8m
Fig. 1
1/4
Technical data sheet: S000087115EN-2
Updated: 18/02/2016
Created: 09/03/2015
Catalogue number(s): 0 489 41/44/48
Compact motion sensors - PIR
230 V~
1000 W
4.3 A
500 VA
2.1 A
5 x (2x36 W)
2.1 A
250 VA
1.1 A
500 VA
2.1 A
230 V~
5 x (2x36 W)
2.1 A
250 W
1.1 A
250 VA
1.1 A
250 VA
1.1 A
250 W
1.1 A
1. USE
This device enables a light source to be controlled automatically by
detecting movement in the monitoring area.
Using infrared (IR) technology, this motion sensor has a 360° detection
angle and, when positioned 2.50 m above the ground,
an 8 m diameter detection area. It is installed on false ceiling (0 489
41/44 or surface ceiling (0 489 48). It is quick and easy to set, using
potentiometers. The light level threshold can vary from 10 to 1275 lux
and the time delay from 10 seconds to 10 minutes.
2. TECHNICAL FEATURES
Voltage: 240 V~
Frequency: 50/60 Hz
Consumption on standby: 0.75 W
Output via normally open contact connected to the phase
Wiring: 1 x 2.5 mm
2
/2 x 1.5 mm
2
Number of terminals: 3
Type of terminal: screw
Drilling diameter for installation in false ceiling: 65 mm
Weight: 71 g
Impact resistance: IK04
Penetration by solid and liquid matter: 0 489 41/44 IP20 (unmonted)
0 489 41/44 IP41 (monted)
0 489 48 IP20
Usage temperature: -5°C to +45°C
Storage temperature: -20°C to +70°C
2. TECHNICAL FEATURES (continued)
CONTENTS
Page
1. Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Technical features . . . . . . . . . . . . . . . . . . . . . .1
3. Overall dimensions . . . . . . . . . . . . . . . . . . . . .2
4. Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
5. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
6. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
7. Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4
8. Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4
9. Standards and approvals . . . . . . . . . . . . . . . .4
1
2
3
4
5
PIR sensor
Time delay
potentiometer
Light level
potentiometer
10 lux
Max: Test mode
1275 lux
1 - Halogen bulbs
2 - ELV halogen bulbs with separate
ferromagnetic ballast
3 - Fluorescent tubes with separate
ferromagnetic ballast
4 - Compact fluorescent bulbs with
separate ferromagnetic ballast
5 - ELV halogen bulbs with separate
electronic ballast
6 - Fluorescent tubes with separate
electronic ballast
7 - Compact fluorescent bulbs with
built-in electronic ballast
8 - Compact fluorescent bulbs with
separate electronic ballast
9 - LED bulbs with separate
electronic ballast
10 - LED bulbs with built-in
electronic ballast
0 489 41/44
0 489 48
10"
10'
2'30"
7'30"
5'
0 489 41/44/48
1/4
Technical data sheet: S000087115EN-2
Updated: 18/02/2016
Created: 09/03/2015
Catalogue number(s): 0 489 41/44/48
Compact motion sensors - PIR
230 V~
1000 W
4.3 A
500 VA
2.1 A
5 x (2x36 W)
2.1 A
250 VA
1.1 A
500 VA
2.1 A
230 V~
5 x (2x36 W)
2.1 A
250 W
1.1 A
250 VA
1.1 A
250 VA
1.1 A
250 W
1.1 A
1. USE
This device enables a light source to be controlled automatically by
detecting movement in the monitoring area.
Using infrared (IR) technology, this motion sensor has a 360° detection
angle and, when positioned 2.50 m above the ground,
an 8 m diameter detection area. It is installed on false ceiling (0 489
41/44 or surface ceiling (0 489 48). It is quick and easy to set, using
potentiometers. The light level threshold can vary from 10 to 1275 lux
and the time delay from 10 seconds to 10 minutes.
2. TECHNICAL FEATURES
Voltage: 240 V~
Frequency: 50/60 Hz
Consumption on standby: 0.75 W
Output via normally open contact connected to the phase
Wiring: 1 x 2.5 mm
2
/2 x 1.5 mm
2
Number of terminals: 3
Type of terminal: screw
Drilling diameter for installation in false ceiling: 65 mm
Weight: 71 g
Impact resistance: IK04
Penetration by solid and liquid matter: 0 489 41/44 IP20 (unmonted)
0 489 41/44 IP41 (monted)
0 489 48 IP20
Usage temperature: -5°C to +45°C
Storage temperature: -20°C to +70°C
2. TECHNICAL FEATURES (continued)
CONTENTS
Page
1. Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2. Technical features . . . . . . . . . . . . . . . . . . . . . .1
3. Overall dimensions . . . . . . . . . . . . . . . . . . . . .2
4. Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
5. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
6. Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
7. Performance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4
8. Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . .4
9. Standards and approvals . . . . . . . . . . . . . . . .4
1
2
3
4
5
PIR sensor
Time delay
potentiometer
Light level
potentiometer
10 lux
Max: Test mode
1275 lux
1 - Halogen bulbs
2 - ELV halogen bulbs with separate
ferromagnetic ballast
3 - Fluorescent tubes with separate
ferromagnetic ballast
4 - Compact fluorescent bulbs with
separate ferromagnetic ballast
5 - ELV halogen bulbs with separate
electronic ballast
6 - Fluorescent tubes with separate
electronic ballast
7 - Compact fluorescent bulbs with
built-in electronic ballast
8 - Compact fluorescent bulbs with
separate electronic ballast
9 - LED bulbs with separate
electronic ballast
10 - LED bulbs with built-in
electronic ballast
0 489 41/44
0 489 48
10"
10'
2'30"
7'30"
5'
0 489 41/44/48
630R02WE
630S02WE