When you turn the throttle switch. Engine acceleration or deceleration
performance is poor, that is to say, the throttle tension line should be adjusted. Methods
refer to chapter 6.
Note: 1
、
Repeatedly turn the throttle switch 2-3 times and confirm the acceleration
and deceleration performance of the engine
。
2
、
Throttle pull wire and pull wire joint must be firmly connected with screws.
D
、
The debugging method of handrail frame
According to your height and farming agronomy and other special requirements,
the armrest frame, under the appropriate debugging, the method is as follows:
Handrail frame and lower debugging:
、
①
Release the locking handle of the armrest frame and let the end teeth between
the armrest frame and the teeth of the grinding disc be separated.
②
Choose the handle position according to your height and habit.
③
Then turn the handle so that the end teeth between the rack and the support
arm mesh.
High and low hands
High and low adjusting handle
Handrail support pedestal
Chapter Ten Common faults and fix methods
A
、
See engine manual for engine failure and troubleshooting methods.
B
、
Clutch failure and troubleshooting.(note: please do not disassemble the clutch
assembly by yourself. Note: please contact our company or the seller for the
malfunction of ※.)
Phenomeno
n
Cause
Elimination methods
Can't clutch
Clutch handle failed
Repair or replace
Clutch tension bars are linearly damaged
replace
Clutch fork adjustment is not in place
Rewire or replace the fork
The welding joint of clutch and fork shaft
combination falls off
Repair or replace
To bend or break a fork pin
Replace the fork pin
※The friction disc fails
replace
※failure of spring
replace
