manualshive.com logo in svg

HPE StoreOnce 3620, Руководство по установке

Поделиться
Скачать
HPE StoreOnce 3620 Скачать руководство пользователя страница 48

Choose a secure password with at least eight characters that is memorable to you.

c.

To configure a static address for LAN port 1 (eno1), select the 

Configure initial network

option from the console menu.

Note the DHCP assigned IP address or the static address details.

IP address:______________________________

Prefix length:_____________________________

Gateway:________________________________

DNS:________________________________

You can remove the console display and keyboard.

16.

Open a web browser and use the IP address from the previous step to access the StoreOnce
system. The First Time Setup wizard is automatically displayed. Use the First Time Setup wizard to
configure the system for use.

The setup steps include:

• Setting the 

Administrator Password

.

• Setting the 

Console Password

.

• Setting basic 

System Information

 such as the system name (host name), location, and contact

information.

• Setting the 

System Date & Time

. You can set the date and time manually, or synchronize the

date and time with a network time server.

• Configuring 

Storage

. The wizard detects the factory installed storage. The wizard also enables

you to configure additional storage capacity that you might have installed. The wizard also reports
issues with additional storage, for example, when additional storage is not installed in the correct
location.

• Configuring 

Remote Support

.

Configuring a newly installed StoreOnce 5200 system

If the system has capacity upgrade enclosures, you can install and configure them before or after
configuring the newly installed system. To install the capacity upgrade kits now, see 

Installing and

connecting the capacity upgrade enclosures

.

For additional information and instructions on each step, see the online help or user guide.

Procedure

1.

Log on to the StoreOnce Management Console. Review and update the settings that were
configured with the First Time Setup Wizard.

• Administrator password

• System information, such as system, location, and contact information

• System date and time, or NTP configuration

• Storage configuration

48

HPE StoreOnce 5200 System

Содержание StoreOnce 3620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды