Configuring a newly installed system
For additional information and instructions on each step, see the online help or user guide.
Prerequisites
• The hardware is installed correctly. If someone else installed the system, see
StoreOnce Gen4 hardware installation
.
• The system is powered on.
• The First Time Setup Wizard has been run.
Open a web browser and access the StoreOnce system. The First Time Setup wizard is automatically
displayed. Use the First Time Setup wizard to configure the system for use.
Procedure
1.
Log on to the StoreOnce Management Console. Review and update the settings that were
configured with the First Time Setup Wizard.
• Administrator password
• System information, such as system, location, and contact information
• System date and time, or NTP configuration
• Storage configuration
• Remote Support configuration
• Console password
2.
Complete the network configuration.
On the main menu, select
Settings
. In the
Hardware
section, click the
Networking
panel.
For additional information, see
Initial StoreOnce network configuration
.
3.
Configure licenses.
a.
On the main menu, select
Settings
.
b.
In the
Systems
section, click the
License Management
panel.
• To view a license summary, click the
Overview
tab.
• To view a list of the installed licenses, click the
Licenses
tab.
For additional information, see
.
4.
Configure user accounts.
a.
On the main menu, select
Settings
.
b.
In the
User Management
section, click the
Users and Groups panel
panel.
122
Configuring a newly installed system
