HPE SN3000B Скачать руководство пользователя страница 57

Страница: 57 / 95

LED name

LED color

Status of hardware

Recommended action

Steady green

DC output is within the expected
range.

No action is required.

Fan assembly
status (one
bicolor LED)

No light

Fan assembly is not receiving
power.

Verify that the fan FRU is seated
correctly.

Steady green

Fan assembly is operating
normally.

No action is required.

Steady amber
(for more than
5 seconds)

Fan fault for one of the following
reasons:

• A fan assembly with

mismatched airflow is
present.

• One or more of the fans in

the fan assembly has failed.

Try one of the following:

• Replace the mismatched fan

assembly with one that has the
correct airflow direction.

• Replace the faulty fan assembly.

Table 9: LED patterns on the port side of the HPE StoreFabric SN6500B, SN6000B,
SN3000B, and SN4000B 16Gb FC switches

LED name

LED color

Status of hardware

Recommended action

System power
(green)

No light

System is off or there is an
internal power supply failure.

Verify that the system is powered on
(power supply switches set to I), the
power cables are attached, and the
power source is live.

The unit may be faulty. Contact your
switch service provider.

Steady green

System is on and power
supplies are functioning
properly.

No action is required.

System status
(bicolor)

No light

System is off or there is no
power.

Verify that the system is on and has
completed booting.

Steady green

System is on and is functioning
properly.

No action is required.

Steady amber
(for more than
5 seconds)

A system fault has occurred.
This LED is steady amber
during POST, which is normal
and does not indicate a fault.

Check the failure indicated on the
system console.

Contact your switch service provider.

Table Continued

Operating HPE 16Gb FC switches

Содержание SN3000B
































































































Результаты поиска

Содержание SN3000B

Отзывы:

Похожие инструкции для SN3000B

Бренды по названию

Популярные бренды

HPE SN3000B, Справочник по аппаратуре

Результаты поиска

Содержание SN3000B

Отзывы:

Похожие инструкции для SN3000B

Бренды по названию

Популярные бренды