HPE SN3000B, Справочник по аппаратуре

Страница: 15 / 95

NOTE:
• Adaptive Networking and Server Application Optimization features are included by default in the
switch firmware FOS 7.2.x or later, and do not require a separate license. For more information
about supported FOS versions, see the HPE SPOCK website at
http://www.hpe.com/storage/
spock .
• For the latest information on supported software components, see the product QuickSpecs
available from the Hewlett Packard Enterprise website: http://www.hpe.com/info/sn6000b/
quickspecs .
ISL Trunking
ISL Trunking is optional software that enables creating trunking groups of ISLs between adjacent
switches. Up to eight FC ports on the SN6000B 16Gb FC Switch can be used as a trunking group to
achieve speeds of up to 128 Gb/s (256 Gb/s full duplex) for optimal bandwidth utilization and load
balancing.
For example, the FC ports on the SAN Switch are numbered from left to right and color-coded in groups
of eight to indicate which ports you can combine into trunking groups.
Figure 5: Trunking groups
example on page 15 shows the switch with three trunking groups of eight ports.
NOTE:
If your switch is licensed for ISL Trunking, use the trunking groups available on the switch.
Figure 5: Trunking groups example
1. Trunking group 1: Ports 0–7 2. Trunking group 2: Ports 8–15
3. Trunking group 3: Ports 16–23
For more information about ISL Trunking, see the Fabric OS 7.0.x Administrator's Guide for the firmware
version you are running.
Hardware options
For more information on optional hardware kits, see Optional hardware kits .
NOTE:
For the latest information on supported hardware components, see the product QuickSpecs
available on the
Hewlett Packard Enterprise website .
ISL Trunking 15