.
.
14.
If the server was removed from a cradle, wall mount, or storage expansion unit:
•
Install the server in the cradle
•
Install the server in the wall mount
•
Install the server on the storage expansion unit
15. Prepare the server for operation
Retaining the recovery key/password
About this task
The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery key/
password is required to enter Recovery Mode after BitLocker detects a possible compromise of system
integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery key/
password:
• Always store the recovery key/password in multiple locations.
• Always store copies of the recovery key/password away from the server.
• Do not save the recovery key/password on the encrypted hard drive.
Enabling the Trusted Platform Module
About this task
CAUTION:
When a TPM is installed and enabled on the server, data access is locked if you fail to follow the proper
procedures for updating the system or option firmware, replacing the system board, replacing a hard
drive, or modifying OS application TPM settings.
Procedure
1.
During the server startup sequence, press the
F9
key to access System Utilities.
2.
From the System Utilities screen, select
System Configuration
>
BIOS/Platform Configuration (RBSU)
>
Server Security
.
3.
Select
Trusted Platform Module Options
, and press the
Enter
key
.
4.
To set the TPM operational state:
• If TPM 1.2 is installed, then select
No Action, Enable, Disable,
or
Clear
.
• If TPM 2.0 is installed, then select
No Action
or
Clear
.
5.
Select
Visible
to set the TPM Visibility, if necessary.
6.
Press the
F10
key to save your selection.
7.
When prompted to save the change in System Utilities, press the
Y
key.
8.
Press the
ESC
key to exit System Utilities. Then, press the
Enter
key when prompted to reboot the
compute module.
The compute module then reboots a second time without user input. During this reboot, the TPM setting
becomes effective.
9.
Enable TPM functionality in the OS, such as Microsoft Windows BitLocker or measured boot.
For more information on adjusting TPM usage in BitLocker, see the Microsoft website (
).
Retaining the recovery key/password
51
Содержание ProLiant Thin Micro TM200
Страница 13: ...Component identification 13...
Страница 34: ...1 2 2 34 Operations...
