HPE ProLiant DL388 Gen10 Скачать руководство пользователя страница 52

Страница: 52 / 169

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the power supply or power

supply blank to cool before touching it.

To replace the component, reverse the removal procedure.

Removing the air baffle

CAUTION:

Do not detach the cable that connects the battery pack to the cache module. Detaching the

cable causes any unsaved data in the cache module to be lost.

CAUTION:

For proper cooling, do not operate the server without the access panel, baffles, expansion

slot covers, or blanks installed. If the server supports hot-plug components, minimize the amount of time
the access panel is open.

Procedure

Power down the server (

Powering down the server

on page 41).

Remove all power:

Disconnect each power cord from the power source.

Disconnect each power cord from the server.

Do one of the following:

• Extend the server from the rack (

Extend the server from the rack

on page 42).

• Remove the server from the rack (

Remove the server from the rack

on page 42).

Remove the access panel (

Remove the access panel

on page 44).

Remove the air baffle.

Removal and replacement procedures

Содержание ProLiant DL388 Gen10










































































































































































Результаты поиска

Содержание ProLiant DL388 Gen10

Отзывы:

Похожие инструкции для ProLiant DL388 Gen10

Бренды по названию

Популярные бренды

HPE ProLiant DL388 Gen10, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant DL388 Gen10

Отзывы:

Похожие инструкции для ProLiant DL388 Gen10

Бренды по названию

Популярные бренды