If the password is invalid, the following message appears and process restarts.
% Login failed!
4.CLI commands
This Command section contains the following commands:
To do…
Use the command…
Display a list of CLI commands on the device
?
Reboot the device and run the default configuration
initialize
Specify VLAN-interface 1 to obtain an IP address through
DHCP or manual configuration
ipsetup { dhcp | ip-address ip-address { mask
| mask-length } [ default-gateway
ip-address ] }
Modify the login password of a user
password
Log out of the system
quit
Download the Boot ROM image or system software image file
from the TFTP server and specify as the startup configuration
file
upgrade server-address source-filename
{ bootrom | runtime }
Reboot the device and run the main configuration file
reboot
View the summary information of the device
summary
Ping a specified destination
ping host
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without
notice.The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements
accompanying such products and services.Nothing herein should be construed as constituting an additional warranty. Hewlett
Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
