HPE Integrity NonStop NS2100, Руководство по планированию

Страница: 108 / 128

D Default Startup Characteristics and Naming Conventions
Each NS2100 system uses “Default Naming Conventions” (page 109) and ships with the following
default startup characteristics:
$SYSTEM disks residing in either SAS disk enclosures:
SAS and SAS CG Disk Enclosures
•
Systems with only two to three Storage CLIM/CLIM CGs and two SAS/SAS CG disk
enclosures with the disks in these locations:
SAS/SAS CG Disk Enclosure CLIM/CLIM CG X1
Location
Bay Enclosure Slot Module Group Path
1 1 3 2 100 Primary
2 1 3 2 100 Backup
3 2 3 2 100 Mirror
4 2 3 2 100 Mirror-Backup
•
Configured system load paths
•
Enabled command interpreter input (CIIN) function
If the automatic system load is not successful, additional paths for loading are available in the
boot task. Using one load path, the system load task attempts to use another path and keeps
trying until all possible paths have been used or the system load is successful. These 16 paths
are available for loading and are listed in the order of their use by the system load task:
ServerNet Fabric Destination
Processor Source Disk Description Load Path
X 0 $SYSTEM-P Primary 1
Y 0 $SYSTEM-P Primary 2
X 0 $SYSTEM-P Backup 3
Y 0 $SYSTEM-P Backup 4
X 0 $SYSTEM-M Mirror 5
Y 0 $SYSTEM-M Mirror 6
X 0 $SYSTEM-M Mirror backup 7
Y 0 $SYSTEM-M Mirror backup 8
X 1 $SYSTEM-P Primary 9
Y 1 $SYSTEM-P Primary 10
X 1 $SYSTEM-P Backup 11
Y 1 $SYSTEM-P Backup 12
X 1 $SYSTEM-M Mirror 13
Y 1 $SYSTEM-M Mirror 14
108 Default Startup Characteristics and Naming Conventions