HPE FlexNetwork 7500 Series, Справочник команд управления и мониторинга сети

Страница: 390 / 430

381
info-center security-logfile directory
Use info-center security-logfile directory to configure the directory where the security log file is
saved.
Syntax
info-center security-logfile directory dir-name
Default
The security log file is saved in the seclog directory under the root directory of the storage device.
Views
System view
Predefined user roles
security-audit
Parameters
dir-name : Specifies a directory by its name, a string of 1 to 511 characters.
Usage guidelines
The specified directory must have been created.
The configuration made by this command cannot survive a reboot or an active/standby switchover.
(In standalone mode.)
The configuration made by this command cannot survive an IRF reboot or a global active/standby
switchover in an IRF fabric. (In IRF mode.)
Examples
# Set the directory to save the security log file to flash:/test .
<Sysname> mkdir test
Creating directory flash:/test... Done.
<Sysname> system-view
[Sysname] info-center security-logfile directory flash:/test
info-center source
Use info-center source to configure a log output rule for a module.
Use undo info-center source to restore the default.
Syntax
info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor }
{ deny | level severity }
undo info-center source { module-name | default } { console | logbuffer | logfile | loghost |
monitor }
Default
Table 87 lists the default log output rules.
Table 87 Default output rules
Destination
Source
modules Common
log
Security log
Diagnostic
log
Hidden log
Console
All supported
debugging Disabled Disabled Disabled