HPE FlexNetwork 5130 EISeries, Руководство по установке

Страница: 45 / 67

41
Appendix B FRUs
The HPE 5130 24G SFP 4SFP+ EI switch provides two power supply slots. One power supply can
meet the power requirement of the switch. You can install two power supplies on the switch for
redundancy.
Table 11 describes the power supplies available for the HPE 5130 24G SFP 4SFP+ EI
switch.
Table 11 Power supplies available for the HPE 5130 24G SFP 4SFP+ EI switch
Power supply model Item Specification Remarks
PSR150-A(JD362A)
PSR150-A1(JD362B)
Rated input voltage
100 VAC to 240 VAC @
50 Hz or 60 Hz
For more information
about the power
supplies, see
HPE
PSR150-A & PSR150-D
Power Supplies User
Guide.
Max input voltage
90 VAC to 264 VAC @ 47
Hz to 63 Hz
Max output power 150 W
PSR150-D(JD366A)
PSR150-D1(JD366B)
Rated input voltage –48 VDC to –60 VDC
Max input voltage –36 VDC to –72 VDC
Max output power 150 W
When two power supplies are installed, you can hot-swap a power supply. To avoid device damage
and bodily injury, follow the procedures in
Figure 16 and Figure 17 to install and remove the power
supply.