HPE FlexFabric 5940 SERIES, Руководство по установке

Страница: 55 / 88

51
Figure 68 Left side panel
(1) Primary grounding point (2) Auxiliary grounding point 1
HPE FlexFabric 5940 2-slot
Figure 69 Front panel
(1) Interface module 1 (2) Interface module 2
Figure 70 Rear panel
(1) Mini USB console port (2) USB port
(3) Fan tray 1 (4) Fan tray 2
(5) Power supply 1 (6) Power supply 2
(7) QSFP+ port (8) QSFP+ port LED
(9) System status LED (SYS) (10) LINK/ACT LED for the management Ethernet port
(11) Management Ethernet port (12) Serial console port
The HPE 5940 2-slot switch comes with interface module slot 1 empty and interface module 2
installed with a filler panel. You can install one or two interface modules for the switch as needed.
In
Figure 69 , two LSWM18QC interface modules are installed in the interface module slots. For more
information about installing and removing interface modules, see " Installing/removing an interface
module ".
The HPE 5940 2-slot switch comes with the two power supply slots empty and a filler panel for the
power supply slot as an accessory. You can install one or two power supplies for the switch as
needed. In
Figure 70 , two 650W AC power supplies are installed in the power supply slots. For more
information about installing and removing power supplies, see " Installing/removing a power supply ."
2 1